MR57
Enterprise NAS with built-in service continuity engineered for data-intensive applications.
Rackmount Nas / 16-Bays
CPU
CPU Model
Intel Xeon D-1541
CPU Quantity
1
CPU Architecture
64-bit
CPU Frequency
8-core 2.1 (base) / 2.7 (turbo) GHz
Hardware Encryption Engine (AES-NI)
+
Memory
System Memory
16 GB DDR4 ECC UDIMM
Memory Module Pre-installed
16 GB (16 GB x 1)
Total Memory Slots
4
Maximum Memory Capacity
64 GB (16 GB x 4)
Notes
- Please select Synology memory modules for optimum compatibility and reliability. Synology will not provide complete product warranty or technical support if non-Synology memory modules are used for memory expansion.
- For more information on the recommended memory configurations, visit here
- Synology reserves the right to replace memory modules with the same or higher frequency based on supplier’s product life cycle status. Rest assured that the compatibility and stability have been strictly verified with the same benchmark to ensure identical performance.
Storage
Drive Bays
16
Maximum Drive Bays with Expansion Unit
40 (RX1217/RX1217RP x 2)
Compatible Drive Type*
3.5″ SATA HDD
2.5″ SATA SSD
Maximum Single Volume Size*
200 TB (32 GB memory required)
108 TB
Hot Swappable Drive
+
Notes
- “Compatible drive type” indicates drives that have been tested to be compatible with Synology products. This term does not indicate the maximum connection speed of each drive bay.
- Each internal volume (may consist of multiple drives) is expandable up to 108 TB (with memory less than 32 GB) or 200 TB (with memory equal to or greater than 32 GB).
External Ports
RJ-45 1GbE LAN Port
4 (with Link Aggregation / Failover support)
RJ-45 10GbE LAN Port
2 (with Link Aggregation / Failover support)
USB 3.2 Gen 1 Port*
2
Expansion Port
2
Notes
The USB 3.0 standard was renamed to USB 3.2 Gen 1 by the USB Implementers Forum (USB-IF) in 2019.
PCIe
PCIe Expansion
2 x Gen3 x8 slots (x8 link)
File System
Internal Drives
- Btrfs
- EXT4
External Drives
- Btrfs
- EXT4
- EXT3
- FAT
- NTFS
- HFS+
- exFAT*
Notes
exFAT Access is purchased separately in Package Center.
Maximum Single Volume Size*
200 TB (32 GB memory required)
108 TB
Appearance
Form Factor (RU)
3U
Size (Height x Width x Depth)
132.3 mm x 482 mm x 656.5 mm
Weight
17.4 kg
Rack Installation Support*
4-post 19″ rack (Synology Rail Kit RKS1317)
Notes
The rail kit is sold separately
Others
System Fan
80 mm x 80 mm x 3 pcs
Fan Speed Mode
- Full-Speed Mode
- Cool Mode
- Quiet Mode
Easy Replacement System Fan
+
Power Recovery
+
Noise Level*
44.7 dB(A)
Scheduled Power On / Off
+
Wake on LAN / WAN
+
Power Supply Unit / Adapter
800 W
Redundant Power Supply
+
AC Input Power Voltage
100 V to 240 V AC
Power Frequency
50/60 Hz, Single Phase
Power Consumption*
145.79 W (Access)
62.68 W (HDD Hibernation)
British Thermal Unit
497.14 BTU/hr (Access)
213.74 BTU/hr (HDD Hibernation)
Notes
- Power consumption is measured when it is fully loaded with Western Digital 1TB WD10EFRX hard drive(s).
- Noise Level Testing Environment: Fully loaded with Seagate 2TB ST2000VN000 hard drive(s) in the idle state. Two G.R.A.S. Type 40AE microphones, each set up 1 meter away from the Synology NAS at the front and rear. Background noise: 16.49-17.51 dB(A); Temperature: 24.25-25.75˚C; Humidity: 58.2-61.8%
Temperature
Operating Temperature
0°C to 35°C (32°F to 95°F)
Storage Temperature
-20°C to 60°C (-5°F to 140°F)
Relative Humidity
5% to 95% RH
Certification
Certification
FCC
CE
BSMI
EAC
KC
VCCI
RCM
Warranty
5 Years
+
Notes
The warranty period starts from the purchase date as stated on your purchase receipt.
Environment
Environment
RoHS Compliant
Packaging Content
Packaging Content
- Main Unit X 1
- Accessory Pack X 1
- AC Power Cord X 2
- Quick Installation Guide X 1
Optional Accessories
Optional Accessories
- DDR4 ECC RDIMM: D4RD-2666-16G*/D4RD-2666-32G
- Expansion Units: FX2421*/RX1217sas
- 2.5″ SATA SSD: SAT5200
- 25GbE Network Interface Card: E25G21-F2
- 10GbE Network Interface Card: E10G21-F2/E10G18-T2/E10G18-T1
- Rail Kit Sliding: RKS1317
- VisualStation: VS960HD/VS360HD
- Surveillance Device License Pack
Notes
It is required to use D4RD-2666-16G with identical memory modules of the same capacity and frequency.
CPU
CPU Model
Intel Xeon D-1541
CPU Quantity
1
CPU Architecture
64-bit
CPU Frequency
8-core 2.1 (base) / 2.7 (turbo) GHz
Hardware Encryption Engine (AES-NI)
+
Memory
System Memory
16 GB DDR4 ECC UDIMM
Memory Module Pre-installed
16 GB (16 GB x 1)
Total Memory Slots
4
Maximum Memory Capacity
64 GB (16 GB x 4)
Notes
- Please select Synology memory modules for optimum compatibility and reliability. Synology will not provide complete product warranty or technical support if non-Synology memory modules are used for memory expansion.
- For more information on the recommended memory configurations, visit here
- Synology reserves the right to replace memory modules with the same or higher frequency based on supplier’s product life cycle status. Rest assured that the compatibility and stability have been strictly verified with the same benchmark to ensure identical performance.
Storage
Drive Bays
16
Maximum Drive Bays with Expansion Unit
40 (RX1217/RX1217RP x 2)
Compatible Drive Type*
3.5″ SATA HDD
2.5″ SATA SSD
Maximum Single Volume Size*
200 TB (32 GB memory required)
108 TB
Hot Swappable Drive
+
Notes
- “Compatible drive type” indicates drives that have been tested to be compatible with Synology products. This term does not indicate the maximum connection speed of each drive bay.
- Each internal volume (may consist of multiple drives) is expandable up to 108 TB (with memory less than 32 GB) or 200 TB (with memory equal to or greater than 32 GB).
External Ports
RJ-45 1GbE LAN Port
4 (with Link Aggregation / Failover support)
RJ-45 10GbE LAN Port
2 (with Link Aggregation / Failover support)
USB 3.2 Gen 1 Port*
2
Expansion Port
2
Notes
The USB 3.0 standard was renamed to USB 3.2 Gen 1 by the USB Implementers Forum (USB-IF) in 2019.
PCIe
PCIe Expansion
2 x Gen3 x8 slots (x8 link)
File System
Internal Drives
- Btrfs
- EXT4
External Drives
- Btrfs
- EXT4
- EXT3
- FAT
- NTFS
- HFS+
- exFAT*
Notes
exFAT Access is purchased separately in Package Center.
Maximum Single Volume Size*
200 TB (32 GB memory required)
108 TB
Appearance
Form Factor (RU)
3U
Size (Height x Width x Depth)
132.3 mm x 482 mm x 656.5 mm
Weight
17.4 kg
Rack Installation Support*
4-post 19″ rack (Synology Rail Kit RKS1317)
Notes
The rail kit is sold separately
Others
System Fan
80 mm x 80 mm x 3 pcs
Fan Speed Mode
- Full-Speed Mode
- Cool Mode
- Quiet Mode
Easy Replacement System Fan
+
Power Recovery
+
Noise Level*
44.7 dB(A)
Scheduled Power On / Off
+
Wake on LAN / WAN
+
Power Supply Unit / Adapter
800 W
Redundant Power Supply
+
AC Input Power Voltage
100 V to 240 V AC
Power Frequency
50/60 Hz, Single Phase
Power Consumption*
145.79 W (Access)
62.68 W (HDD Hibernation)
British Thermal Unit
497.14 BTU/hr (Access)
213.74 BTU/hr (HDD Hibernation)
Notes
- Power consumption is measured when it is fully loaded with Western Digital 1TB WD10EFRX hard drive(s).
- Noise Level Testing Environment: Fully loaded with Seagate 2TB ST2000VN000 hard drive(s) in the idle state. Two G.R.A.S. Type 40AE microphones, each set up 1 meter away from the Synology NAS at the front and rear. Background noise: 16.49-17.51 dB(A); Temperature: 24.25-25.75˚C; Humidity: 58.2-61.8%
Temperature
Operating Temperature
0°C to 35°C (32°F to 95°F)
Storage Temperature
-20°C to 60°C (-5°F to 140°F)
Relative Humidity
5% to 95% RH
Certification
Certification
FCC
CE
BSMI
EAC
KC
VCCI
RCM
Warranty
5 Years
+
Notes
The warranty period starts from the purchase date as stated on your purchase receipt.
Environment
Environment
RoHS Compliant
Packaging Content
Packaging Content
- Main Unit X 1
- Accessory Pack X 1
- AC Power Cord X 2
- Quick Installation Guide X 1
Optional Accessories
Optional Accessories
- DDR4 ECC RDIMM: D4RD-2666-16G*/D4RD-2666-32G
- Expansion Units: FX2421*/RX1217sas
- 2.5″ SATA SSD: SAT5200
- 25GbE Network Interface Card: E25G21-F2
- 10GbE Network Interface Card: E10G21-F2/E10G18-T2/E10G18-T1
- Rail Kit Sliding: RKS1317
- VisualStation: VS960HD/VS360HD
- Surveillance Device License Pack
Notes
It is required to use D4RD-2666-16G with identical memory modules of the same capacity and frequency.
